Expert Local Home Services In Sacramento CA
CABS Heating & Air Conditioning is happy to provide expert local service in Sacramento, CA. Started in 2011, our company is family-owned and operated as well as dedicated to bringing you the best in home comfort services. Our HVAC services include AC and furnace repair, replacements, and maintenance. We also do plumbing & electric work!
We invite you to check out some of our reviews from others in Sacramento, CA. They’ll demonstrate our commitment to quality service with every job we do. Don’t wait – call CABS today at 916-375-1800 to get started now!
Local Reviews
for Sacramento, CA
Our Reviews by City
Excellent and prompt service
Jan - Sacramento, CA 95835
Serviced my unit
Mary - Sacramento, CA 95816
He is the sweet is young man He patiently e answered my question gave me a better understanding of my unit. He is a GEM
CAB Heating and Air
Virginia - Sacramento, CA 95825
I just replaced my home heating and air conditioning unit with CAB Heating and Air Conditioning Company. The process was seamless from beginning to end. All of the technicians were efficient, professional, and courteous. I would highly recommend this company!
On time and efficient
Charles - Sacramento, CA 95831
Never any complaints.
Excellent Service
Gwen - Sacramento, CA 95816
Very satisfactory service
John - Sacramento, CA 95834
Very pleased with service
Excellent service
Anne - Sacramento, CA 95831
Extremely nice service man, Michael.
Good service!
Maggie - Sacramento, CA 95821
He was very friendly and did a good job!
Response from CABS Heating and Air Conditioning:
Many thanks for taking the time to share your feedback with us. We’re very happy to hear that we met your expectations!
Excellent service and quality!
Dennis - Sacramento, CA 95820
All went well!
Mary - Sacramento, CA 95834
Nick was thorough and professional
Extraordinary Service
Audrey - Sacramento, CA 95825
Ronnie is the technician extraordinaire! We need a new circuit board, but he ruled out every other thing before arriving at that conclusion. So happy that his thorough and honest assessment solved our problem.
Very professional
Mary - Sacramento, CA 95818
Always exceeds expectations
Dustin - Sacramento, CA 95833
Great communicators, efficient, and always helpful.
Great service
Elizabeth - Sacramento, CA 95834
Great Service
George - Sacramento, CA 95831
Service professional and courteous.
Cheryl - Sacramento, CA 95831
Excellent service
Teri - Sacramento, CA 95818
Professional, friendly, courteous service
Pamella - Sacramento, CA 95822
Response from CABS Heating and Air Conditioning:
Thank you so much for this great 5-star review. We really appreciate your business
Heating system tuneup.
Carol - Sacramento, CA 95825
Eight years of service. Ronnie always does a great job. Referral worthy. Thanks
Response from CABS Heating and Air Conditioning:
Thanks for leaving us such a wonderful review. We are glad that you loved our services, our dedicated staff will be pleased to learn of your high praise.
great service!
Greg - Sacramento, CA 95831
Response from CABS Heating and Air Conditioning:
We're delighted to hear that you had a positive experience with us. Thank you for your kind words.
Excellent service and attitude.
Gwynne - Sacramento, CA 95864
The technician knew what to look for in this Aging unit and found a couple of very important things. He did so in a very short period of time. He was both competent and friendly, and overall most helpful.
Excellent
Duane - Sacramento, CA 95822
I have been using CABS for years and will continue to use them, very satisfied with the service and their technicians
Noah B.
Our client contacted us about replacing their old attic insulation with blown-in attic insulation. We explained how they can save a lot of money on energy bills and even help with the indoor air quality and noise levels in their home.
Ronnie C.
Age: 3 yr Lennox Size: 2 ton Location: heat pump package roof Filter: Aprile air 613 Work performed: annual heat maintenance, system is operating properly at this time and within manufactured specifications. Tighten all high voltage and low voltage wiring, changed filter that was provided by customer, condenser coil is clean from debris, evaporator coil is clean, blower wheel is clean, condensation line is clear, condenser fan motor is running at 1.05 of 1.2 amps, blower motor is running at 1.29 of 1.7 amps, and compressor is running at 6.99 of 11.7 amps and getting a temperature rise of 37 degrees.
Ronnie C.
Upon arrival I found unit working properly, customer sound concern was from defrost mode, opened service panel to find pin for temperature sensor not set properly. Talked to the customer if this happens more through out the not so colder days to call us.
Nick S.
S30,
Michael B.
MFG DATE: 2020 EQUIPMENT MFG: Lennox Upon arrival the client stated that the system has been good. The air filter is located basement. The filter is in a okay condition. The duct work is located in basement . Ducting is sealed and intact.. Furnace is located basement. I removed the service panel from the unit. Tightened all electrical connections. Blower motor was measured at 4.5 amps Blower wheel is a bit dusty. Indoor coil was good. Return temperature was 77 degrees. Supply temperature was 126 degrees. Inducer motor amp draw was .3 amps . Hot surface ignitor was good. Cleaned flame sensor. System is operating correctly. WORK SUGGESTED: surge protectors for both units
Michael B.
MFG DATE:2019 EQUIPMENT MFG: Goodman Upon arrival the client stated that the system has been working but it gets hotter upstairs. System isn’t zoned and that’s why is hotter upstairs. The air filter is located hallway. The filter is in a poor condition. The duct work is located in underneath. Ducting is sealed and intact. Furnace is located outside. I removed the service panel from the unit. Tightened all electrical connections. Blower motor was measured at 2.5 amps Blower wheel is dirty. Return temperature was 68 degrees. Supply temperature was 100 degrees. Inducer motor amp draw was 1.2 amps . Hot surface ignitor was good. Cleaned flame sensor. System is operating correctly. WORK SUGGESTED: install surge protector and I-wave. Replace filter. Trim the plants around the system because it’s a fire hazard!!!!
Michael B.
MFG DATE: 2021 EQUIPMENT MFG: Lennox Upon arrival the client stated that the system has been good. The air filter is located attic. The filter is in a new condition. The duct work is located in attic . Ducting is sealed and intact. Attic insulation is good. Air handler is located attic. I removed the service panel from the unit. Tightened all electrical connections. Blower motor was measured at .7 amps Blower wheel is clean. Indoor coil was clean. Return temperature was 70 degrees. Supply temperature was 93 degrees. Outdoor unit is located ground . Removed the service panel from the unit. Cleaned all debris from the electrical compartment. Tightened high voltage on the contactor switch. Contactor pads are good. The unit is equipped with a 40/10. MFD capacitor. The Capacitor is rated for a +/- 5 % and was measured at 41/10 MFD. Outdoor fan motor is rated for 1.7 max amps and was measured at 1.2 amps. The Compressor was measured at 10 amps and is rated for a max amp draw of 15.3 amps.
Ronnie C.
Age: 35 yr Payne Size: 80 k btu Location: gas split basement ground Upon arrival I found the inducer motor not balanced and mounts there stripped out. Also found blower motor leaking a lot of oil and shaft is loose. Performed a safety inspection on the heat exchanger to find minor fractures. Secondary heat exchanger is rusting away as well. System is not currently running. Going to send customers quotes on a few different options. Including hvac, electrical panel and water heater.
Michael B.
MFG DATE: 2017 EQUIPMENT MFG: RHEEM Upon arrival the client stated that the system has been good. The air filter is located hallway. The filter is in a new condition. The duct work is located in attic. Ducting is sealed and intact. Furnace is located hallway. I removed the service panel from the unit. Tightened all electrical connections. Blower motor was measured at 4.6 amps Blower wheel is good. Return temperature was 67 degrees. Supply temperature was 97 degrees. Outlet gas pressure was 3.5 WC. Inlet gas pressure was 7.3 WC. Inducer motor amp draw was 1.05 amps. Hot surface ignitor was good. Cleaned flame sensor. System is operating correctly. WORK SUGGESTED: install surge protector. Next spring tune up we need to make sure water isn’t leaking from the Evap coil.
Ronnie C.
Age: 4 yr Lennox Size: 2.5 ton Location: heat pump split garage ground Filter: Aprile air Work performed: annual heat maintenance, system is operating properly at this time and within manufactured specifications. Blower wheel is clean, evaporator coil is clean, no oil leaking from blower or condenser fan motor, tighten all high voltage and low voltage wiring, condensation line is clear, variable speed blower motor is running at 1.34 of 4.0 amps, no browning on the circuit board, no browning on the defrost board, condenser fan motor is running at .51 of .70 amps, compressor amps are running at 7.12 of 11.7 amps, washed off condenser coils with water and now clean. Work suggested Surge protectors for units
Ronnie C.
Upon arrival I turned on the heat system fired up, let system run for 20 mins and operating properly, noticed system did not have heat strips installed. We will need to order heat strips and install them. Will call Jackie to call customer to schedule.
Michael B.
MFG DATE: 2022 EQUIPMENT MFG: Daikin Upon arrival the client stated that the system has been good. The air filter is located attic. The filter is in a okay condition. The duct work is located in attic. Ducting is sealed and intact. Attic insulation is good. Air handler is located attic. I removed the service panel from the unit. Tightened all electrical connections. Blower motor was measured at .77 amps Blower wheel is clean. Indoor coil was clean. Return temperature was 65 degrees. Supply temperature was 78 degrees. Outdoor unit is located ground. Removed the service panel from the unit. Cleaned all debris from the electrical compartment. The Compressor was measured at 3.9 amps and is rated for a max amp draw of 20 amps. Refrigerant type is 410. Refrigerant suction pressure were 144psi Outdoor temperature was 49 degrees. Washed the outdoor coil System is operating correctly. WORK SUGGESTED: keep up the maintenance. Install overflow switch and surge protector
Nick S.
AGE/MANUF:1 year, Lennox SIZE:2 LOCATION:garage side yard FILTER:y6604 DUCTING:silver flex INSULATION R-VALUE:r39 WORK PERFORMED: Upon arrival the client stated that the system has been running very well. The filter is in a poor condition. Ducting is sealed and intact.I removed the service panel from the unit. Tightened all electrical connections. WORK SUGGESTED: recommended installing surge protector on both the air handler and condenser Recommend joining maintenance plan CALCULATIONS: Blower motor was measured at 1.23 amps Blower wheel is clean. Indoor coil was Clean. Outdoor unit is located back yard . Removed the service panel from the unit. Cleaned all debris from the electrical compartment. Tightened high voltage on the contactor switch. Contactor pads are Good. Outdoor fan motor is rated for 2.8 max amps and was measured at 0.75 amps. The Compressor was measured at 5.59 amps and is rated for a max amp draw of 13 amps. Refrigerant type is r410a. Washed the outdoor
Michael B.
MFG DATE: 2020 EQUIPMENT MFG: Lennox Upon arrival the client wasn't home . The air filter is located inside. The duct work is located in underneath the house. Furnace is located outside. I removed the service panel from the unit. Tightened all electrical connections. Blower motor was measured at 4 amps Blower wheel is a bit dusty. Indoor coil was dusty. Return temperature was 70 degrees. Supply temperature was 123 degrees. Inducer motor amp draw was .12 amps. Hot surface ignitor was good. Cleaned flame sensor. System is operating correctly. WORK SUGGESTED: make sure filters are clean. Insta Surge protector to protect system from power outages. Clean evap coil
Mikhail P.
Blew in insulation and performed start up. Must return tomorrow to complete PVC on the roof. Completed pvc for condensate drain Collected $12978.10 check number 1754
Nick S.
Start system up. Noticed that the system is a natural draft system, no longer used, as not efficient, to heat. With age of system finding parts for either the ac, or furnace is going to be hard. Did notice aLot of rust starting to eat away at the existing portion of the heat exchanger. Noticed, that the venting on the system, is attached to the water heater, water heater is not venting properly, as it is disconnected, as well as tape holding together exhaust of system, causing a potential risk because not properly venting. Have pictures so home owner can see. With the refrigerant leak last year already happening with the system and not repaired, along with blower wheel showing rust on fins, and blower motor Having issues, system running r22, and being a natural draft inducer. Efficiency wise replacement would be the best options. Left voicemail to go over findings, and options for system.
Ronnie C.
Age: 6 yr Lennox Size: 70 k btu Location: gas solution garage ground Filter: 14x25x1 Work performed: annual heat maintenance, system is operating good at this time and within manufactured spe
Ronnie C.
Age: 5 yr Goodman Size: 80 k btu Location: gas split attic ground Filter: 20x30 and 14x14 Ducting: R-6 silver flex seal and intact Insulation: R-38 batted Work performed: annual heat maintenance, system is operating at this time and within manufactured specifications, tighten all wiring in the system, circuit board has no browning occuring, blower wheel light dust debris, blower capacitors charge 19.6 of 20.0 mfd, burners are clean, flame sensor is clean, hot surface igniter is good, inducer motor assembly is running at 2.8 of 2.8 amps, blower motor is running at 4.47 of 7.1 amps, pressure switch hoses are clear of debris, and getting a temp rise of 42 degrees. Work suggested Surge protector
Michael B.
MFG DATE: 2020 EQUIPMENT MFG: Lennox Upon arrival the client stated that the system has been good. The air filter is located garage. The filter is in a new condition. The duct work is located in attic. Ducting is sealed and intact. Air handler is located garage. I removed the service panel from the unit. Tightened all electrical connections. Blower motor was measured at 1.7 amps Blower wheel is clean. Indoor coil was clean. Return temperature was 72 degrees. Supply temperature was 100 degrees. Outdoor unit is located ground . Removed the service panel from the unit. Cleaned all debris from the electrical compartment. Tightened high voltage on the contactor switch. Contactor pads are good. The unit is equipped with a 40/10 MFD capacitor. The Capacitor is rated for a +/- 5 % and was measured at 38.9/9.9 MFD. Outdoor fan motor is rated for 1.7 max amps and was measured at 1.3 amps. The Compressor was measured at 10 amps and is rated for a max amp draw of 15 amps. Washed the outdoor coil
Nick S.
AGE/MANUF:2 year, Lennox SIZE:3 LOCATION:attic side yard FILTER:ok, aprilaire 210 DUCTING:black flex INSULATION R-VALUE:r39 WORK PERFORMED: Upon arrival the client stated that the system has been running very well. The filter is in a good condition. Ducting is sealed and intact.I removed the service panel from the unit. Tightened all electrical connections. WORK SUGGESTED: recommended installing surge protector on both the air handler and condenser CALCULATIONS: Blower motor was measured at 1.48(variable speed) , rated for 6.9 max amps. Blower wheel is clean. Indoor coil was clean. Return temperature was 75 degrees. Supply temperature was 109 degrees. Return static pressure was .13 WC Supply static pressure was .10 WC. Outdoor unit is located backyard. Removed the service panel from the unit. Cleaned all debris from the electrical compartment. Tightened high voltage on the contactor switch. Contactor pads are Good. The unit is equipped with a 40/10 MFD capacitor. The Capacitor i
Michael B.
MFG DATE: 2020 EQUIPMENT MFG: Lennox Upon arrival the client stated that the system has been good. The air filter is located attic. The filter is in a good condition. The duct work is located in attic. Ducting is sealed and intact. Attic insulation is good. Air handler is located attic. I removed the service panel from the unit. Tightened all electrical connections. Blower motor was measured at 2.8 amps Blower wheel is good. Indoor coil was good. Return temperature was 69 degrees. Supply temperature was 96 degrees. Outdoor unit is located ground . Removed the service panel from the unit. Cleaned all debris from the electrical compartment. Tightened high voltage on the contactor switch. Contactor pads are good. The unit is equipped with a 30/10 MFD capacitor. The Capacitor is rated for a +/- 5 % and was measured at 29.2/9.8 MFD. Outdoor fan motor is rated for 1.8 max amps and was measured at 1.2 amps. The Compressor was measured at 10.2 amps and is rated for a max amp draw of 21 amps.
Ronnie C.
Jesse ordered top of unit that is dented, also one of the plastic screws broke on air handler, when we return for repair can we bring a white washer and white screw head to fix that spot thank you.
Nick S.
AGE/MANUF:21 Goodman LOCATION:attic FILTER:pleated DUCTING: silver flex r8 WORK PERFORMED: Upon arrival the client stated that the system has been ok,. The air filter is located in hallway . The filter is in a good condition. The duct work is located in attic. Ducting is sealed and intact.. Unit is located attic. I removed the service panel from the unit. Tightened all electrical connections. While doing a safety check of the heat exchanger, was able to see 2/3 chambers at entrance of heat exchanger against fire wile has formed a gap. Informed client of the safety issues with this being found. And let client make the decision on leaving gas on or off. Did test combustion and combustion analyzer, 9% O2, with 7-9Ppm at combustion. Let client know of findings and left form in email of safety hazards of this. Recommend replacing full system, from findings with the A/C and findings now with the heater, repairs on this old of a system is not recommended. CALCULATIONS: Blower motor w
Michael B.
MFG DATE:2020 EQUIPMENT MFG:Lennox Upon arrival the client stated that the system has been good. The air filter is located attic. The filter is in a good condition. The duct work is located in attic. Ducting is sealed and intact. Attic insulation is good. Air handler is located attic. I removed the service panel from the unit. Tightened all electrical connections. Blower motor was measured at 2.8 amps Blower wheel is clean. Indoor coil was clean. Return temperature was 68 degrees. Supply temperature was 93 degrees. Outdoor unit is located ground. Removed the service panel from the unit. Cleaned all debris from the electrical compartment. Tightened high voltage on the contactor switch. Contactor pads are goods. The unit is equipped with a 30/10MFD capacitor. The Capacitor is rated for a +/- 5% and was measured at 2828.6/9.7 MFD. Outdoor fan motor is rated for 1.8 max amps and was measured at 1.2 amps. The Compressor was measured at 13 amps and is rated for a max amp draw of 21 amps. W
Michael B.
PGNE came out here before me and shut of the gas because there wasn’t a disconnect switch and the hot surface ignitor failed. They completely capped of the gas for that reason. I reconnected the gas and tried my universal hot surface ignitor but it was too short. I will need to order the oem ignitor from manufacturer. Update: installed oem ignitor and system fired right up. System is working properly as of right now but the two 14x20x1 filters need to be replaced.
